Road Maintenance Skid Steer Loader
Recommended accessories for skid steers in road work：
1.Sweeper: 72/84-inch, cleans roads/ports, 1200m/h efficiency, suits milled roads.
2.Milling planer: 18-40-inch, for mini skidloaders, planes bitumen/concrete (large-flow required).
3.Hydraulic hammer: 4 types, 5 shovels, breaks pavement (20m²/h) and demolishes.
4.Manhole milling planer: Cuts asphalt around manholes via positioning.
5.Wheel trencher: Ditches for pipes, 610mm max depth, precise.
6.Vibratory roller: 60-84-inch, compacts surfaces, side-shift drum.
Introduction of the product
1.Versatility: Compatible with multiple attachments (sweeper, planer, breaker) for sweeping, milling, repairing, and trenching.
2.Easy Operation: Flexible and user-friendly, adapting seamlessly to diverse tasks.
3.Efficiency & Energy Savings: Enhances speed and accuracy, cutting time and labor costs.
4.Compact & Adaptable: Excels in narrow/complex spaces, perfect for urban road work.
5.Cost-Effectiveness: Multi-tasking capability reduces equipment and maintenance expenses.
6.Hydraulic System: Equipped with a dual-speed motor and parking brake for better efficiency and control.
7.Cooling System: High-efficiency aluminum radiator maintains optimal cooling even under heavy use.
8.Cab: Fully enclosed for operator comfort, with heater, fan, warning lights, mirrors, and reverse buzzer.
9.Certification: CE certified, complying with European safety and quality standards.
Road maintenance
Sweeper:The sweeper is used for cleaning roads, municipal administration areas, ports, plazas, and factory areas. It can move forward or backward to clean dust and waste. It provides rapid cleaning for parking lots, sidewalks, docks, and warehouses. It can also be used to spread materials evenly. Model numbers are 72 inches and 84 inches. The efficiency is 1200m/h, and the capacity is 0.47L. The sweeper for the skid steer loader can sweep the surface of milled roads and is part of mechanized construction. |
|
| Milling planer:The mini skidloader can be equipped with this milling planer. The milling planer has two types: standard and large-flow models. With a direct-drive and high-torque hydraulic motor, and a hydraulic side shifter, the milling planer can mill corners and curb sides. The milling planer can be controlled to maintain the same cutting depth and is easy to maintain. It allows for easy and fast planing of bitumen and concrete floors (municipal, highway, freeway, and airport). Standard models are 18 inches (457mm), 24 inches (610mm), and 40 inches (1016mm). All these models require a skid steer loader with a large flow. |
Hydraulic hammer:The skid steer loader can be equipped with this hydraulic hammer. The hydraulic hammer can be used for breaking cement and asphalt pavement, and it is very fast and efficient, with a breaking efficiency of up to 20m²/hour. At the same time, the hydraulic hammer can also be used for demolition in construction areas. It is suitable for road, municipal, and other uses. Depending on the loader model, there are four different hydraulic hammers and five different types of shovels (Slotted, Shaped, Pyramid, Wedged, and Cone). |
|
| Manhole cover type milling planer:This attachment is mainly used for cutting damaged asphalt around manhole covers on municipal roads. To use it, first open the manhole cover and fix the positioner in the well frame. Adjust the cutter to the asphalt road, then begin cutting until reaching the soil layer. Finally, lift the positioning shaft, and the positioner along with the cut asphalt portion will be lifted. |
Wheel trencher:The skid steer loader can be equipped with this wheel trencher. When you need to lay water pipes, gas pipes, cables, or repair highways, the wheel trencher can help save time and labor. Compared to a hydraulic hammer, the wheel trencher is more accurate in cutting asphalt, frozen ground, or wire netting, with a maximum ditching depth of 610mm. |
|
| Vibratory roller:The skid steer loader can be equipped with this vibratory roller. The vibratory roller can move forward and backward to compact road surfaces, channels, and asphalt potholes. The vibration drum can be side-shifted to make uneven areas more compacted. There are four models: 60 inches, 66 inches, 72 inches, and 84 inches. |
Parameters
Major | WT730 | WT830 | WT1100 | WT1200 | WT1405 | WT1605A | |
A | Overall Operating Height(mm) | 3897 | 4143 | 4347 | |||
B | Height To Bucket Hinge Pin(mm) | 2982 | 3205 | 3407 | |||
C | Height To Top Of Cab (mm) | 2090 | 2065 | 2075 | |||
D | Height ToBottom OfLevel Bucket(mm) | 2855 | 3010 | 3217 | |||
E | Overall Length Without Bucket(mm) | 2536 | 2857 | 3051 | |||
F | Overall Length With Bucket (mm) | 3352 | 3649 | 3835 | |||
G | Dumping Height (mm) | 2266 | 2460 | 2679 | |||
H | DumpingReach (mm) | 662 | 590 | 868 | |||
I | Rollback Of Bucket On Ground(°) | 25 | 30 | 26 | |||
J | Ground Clearance(mm) | 210 | 195 | 220 | |||
K | Angle Of Departure(°) | 30 | 26 | 26 | |||
L | Front Turning Radius without Bucket(mm) | 1252 | 1338 | 1390 | |||
M | Front Turning Radius(mm) | 2052 | 2174 | 2246 | |||
N | Rear Turning Radius(mm) | 1516 | 1746 | 1898 | |||
0 | Width (mm) | 1730 | 1798 | 1864 | |||
P | Bucket Width (mm) | 1800 | 1910 | 1980 | |||
Technical Specification
ltem | WT730 | WT830 | WT930 | WT870 | WT1100 | WT1605A |
EngineModel | China Engine | China Engine | China Engine | ChinaEngine | China Engne | China Engne |
RatedPower(KW) | 39 | 45 | 45 | 45 | 65 | 85 |
RotatingSpeed(rpm) | 2650 | 2650 | 2650 | 2300 | 2200 | 2200 |
Max.Speed(km/h) | 12 | 11.2 | 11.2 | 11.5 | 11.2/22.4 | 10.1/18.5 |
Tire | 10-16.5 | 10-16.5 | 12-16.5 | 10-16.5 | 12-16.5 | 12-16.5 |
OperatingLoad(kg) | 730 | 830 | 930 | 870 | 1100 | 1600 |
Max.Loading(kg) | 1460 | 1660 | 1860 | 1740 | 2200 | 3200 |
LiftingType | Radial | Radial | Radial | Radial | Radial | Radial |
TotalCyclingTime(s) | 10.2 | 10.2 | 10.2 | 11 | 9 | 9.5 |
BucketCapacity(m3) | 0.47 | 0.47 | 0.51 | 0.42 | 0.53 | 0.55 |
PressureOfWorkingSystem(bar) | 180 | 180 | 180 | 200 | 235 | 235 |
RatedFlux(L/min) | 80 | 80 | 80 | 80 | 76 | 75 |
HighFlowFlux(Lmin) | without | without | without | without | 140 | 150 |
FuelTankCapacity(L) | 81 | 81 | 81 | 85 | 106 | 86 |
Self-weightWithBucket(kg) | 2850 | 2980 | 3230 | 3050 | 3810 | 4260 |
ControlType | Manual/ | Manual/ | Manual/ | Manual/ | Manual/ | Manual/ |
TEVIS Machinery Applications
1.Construction – Earthmoving, concrete work, and material handling
2.Mining – Ore transport, slag removal, and road building
3.Ports & Logistics – Loading, hauling, and site cleanup
4.Municipal Projects – Roadworks, pipeline laying, and landscaping
Why Choose TEVIS?
TEVIS delivers reliable, efficient, and eco-friendly machines built for real-world demands. From skid steer loaders to bulldozers, we offer smart solutions tailored to your job.
TEVIS — Built for Work. Powered by Innovation.
